mil-prf- 28876 c-12 c glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2010 glenair, inc. printed in u.s.a. cage codes 06324 www.glenair.com e-mail: sales@glenair.com 189-015 environmental banding backshell for multichannel m85045 shipboard fiber optic cable for use with mil-prf-28876 or glenair 180-040 connectors 1.0 (25.4) 2.0 (50.8) shrink sleeving mil-i-23053/4 (see note 3) shrink sleeving mil-i-23053/5 (see note 3) o-ring (see note 2) accomodates band part num- ber 600-052 length spacer ring (see note 2) .310 (7.9) cable entry a thread knurl style manufac - turer's option typ. k dia. c dia. b dia. l internal mechanical strain relief anti-rotation (automatic clamp used instead of traditional saddle bars to protect optical fbers) 189 - 015 nf 13 05 - 3 b product series finish (table ii) shell size (table i) dash number (table iii) length in 1/2 inch increments (e.g. 3 = 1.5 inches) band 600-052 supplied (omit if not required) basic part number
mil-prf- 28876 c-13 c glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2010 glenair, inc. printed in u.s.a. cage codes 06324 www.glenair.com e-mail: sales@glenair.com 189-015 environmental banding backshell for multichannel m85045 shipboard fiber optic cable for use with mil-prf-28876 or glenair 180-040 connectors table i: shell size shell size designator (ref) a thread class 2b b dia max c dia max max dash number 11 a 3/4 -20 unef 1.028 (26.1) .410 (10.4) 05 13 b 7/8 -20 unef 1.141 (29.0) .532 (13.5) 05 15 c 1 -20 unef 1.263 (32.1) .710 (18.0) 07 23 f 1-7/16 -18 unef 1.703 (43.3) 1.116 (28.3) 13 table ii: finish sym material finish m aluminum electroless nickel nf aluminum cadmium o.d. over electroless nickel (500-hr. salt spray) application notes 1. material/ finishes: adapter, coupling nut C aluminim alloy/see table ii clamp components C ryton r4xt-black; ultem 1000-natural anti-rotation device C torlon 4203l-natural o-ring C fluorosilicone/ n.a. 2. spacer ring and o-ring are packed loose and must be installed with connector at time of assembly. the spacer is utilized to retain the terminus insert. 3. mil-i-23053/4 & 5 shrink sleeving are packed loose in a plastic bag. mil-i-2305/4 shrink sleeving to be heat shrinked over rear of adapter before mil-i-23053/5 shrink sleeving. 4. metric dimensions (mm) are indicated in parentheses. table i: cable entry and shrink sleeve dash number dash no. clamp size cable size maximum k diameter +.005 (0.1) l max dash no. mil-i-2305/4 shrink sleeve dash no. mil-i-23053/5 shrink sleeve cable entry minimum maximum 05 12 .280 (7.1) .312 (7.9) 1.110 (28.2) -203-0 -107-0 .203 (5.2) .375 (9.5) 07 16 .395 (10.0) .438 (11.1) 1.210 (30.7) -204-0 -108-0 .328 (8.3) .500 (12.7) 09 20 .510 (13.0) .562 (14.3) 1.210 (30.7) -204-0 -109-0 .452 (11.5) .625 (15.9) 11 24 .621 (15.8) .688 (17.5) 1.210 (30.7) -205-0 -106-0 .515 (13.1) .750 (19.1) 13 28 .736 (18.7) .812 (20.6) 1.360 (34.5) -205-0 -110-0 .640 (16.3) .875 (22.2)
|
